2009-17 Yamaha FZ-6R FZ6R JT X1R3 OEM 520 SILVER X-Ring CHAIN AND SPROCKETS KIT

Description

Yamaha FZ-6R  2009-2
017
(
NOT
FZ-6 , R6 or R6s)
Complete Performance JT  Chain & Sprocket Kit
Available in...
*Exact OEM 16/46t
-or-
Quick Acceleration (mild) 16/47t
-or-
Freeway Commuter  RPM's 16/43t
Included in this kit unless otherwise specified:
OEM
16/46t gearing sizes as follows..
JT
16
tooth
Front &
46
tooth lightweight Steel Rear Sprocket
(c49 high carbon Japan steel Rear, scm420 chromoly Japan steel alloy Front )
and a new Japanese steel JT X1R3
BLACK
(Dark Silver)
520  x 118L
X-Ring Chain .
(JT calls it Black, but it's more like Dark Silver)
JT X-Ring Chain is also available in
GOLD
(costs more,  CALL!)
.
Leave note in
"Add Message To Seller"
tab during checkout to request
optional size sprockets.
Available
optional gear ratios
!
Message or
Call
RPE
to special order
RPEcycle.
Unless otherwise specified, Chain & sprockets are sent in OEM 520x16/46t  size
.
JT X1R3  520 X-Ring Chains  include a dual-link
CLIP TYPE  and
RIVET TYPE
MASTER LINK
(Request during check out in the "Add Message" tab and we'll send a bill after the sale, or Call )
.
For Reference, OEM sizes as supplied from Yamaha are;
2009-2017 YAMAHA FZ-6R  OEM size is 520x118L X-ring chain, 16t Ft. Sprocket, 46t Rear Sprocket
(Same on US models and World models)
This kit is provided with all 520 size chain and sprocket components
RPE Motorcycle had an exclusive higher strength
525 Conversion Kit
and
530 Conversion Kit
available
NOW
!  Call for details !
For
(Mild) QUICK Acceleration 16/47t
gear ratio (Quicker off the line, snappy roll on's, easier wheelies),
Request a 47t rear sprocket during check out in the "Add Message" tab.
The +1t rear sprocket change is very mild change, in the direction of quickness, with no noticeable side effects.
Just a little bit quicker throttle response.
.
For
FREEWAY GEARING 16/43t
FASTER
TOP SPEED, and
LOWER
HIGHWAY CRUISING RPM's,
Request a 16t front sprocket, and a 43t (-3T) rear sprocket.
(...or you can use a special order 45t (-1t) rear
for a VERY mild change in that direction)
T
he -1t rear sprocket is a mild change, the -3t will be very noticeable in lower top gear cruising rpm's and higher top speed,
but may feel slower off the line..
Original Factory Supplied OEM 16/46t
size sprockets are the calculated
"Happy Medium"
of off the line acceleration,
roll on's, and  reasonable high speed engine rpm's
with the least amount of compromise on either top end or low end acceleration
If you are using your entire gear box ratio as it is from Yamaha, then OEM 16/46t sprocket sizes are best for you.
(520x16/46t
Exact OEM Ratio is the
Default
gearing supplied)
Available JT Steel Sprocket Sizes;
JT 520 Japan Steel Ft. Sprocket is available in 520 x
16
teeth
ONLY
(We have a 15, 16 and 17t in 525 Conversion sizes and 520x15 and 17 in other brands,  these all cost more than 520 JT and 525 Conversions)
JT 520 Japan Steel Rr. Sprocket is available in 520 x 43, 45,
46
or 47 teeth
only
525 & 530 CONVERSION KIT
in  JT Steel also Available
More $$  Call for pricing
525 & 530 version available
for maximum strength and longest life!!
Commuter kit
525 & 530 Conversion
Available
$$ Upgrade  CALL!!
All chain and sprocket kits available in JT , RK and DID
520 , 525 or 530 X-ring  (call for prices)
All JT 520 X1R3 chains include a
CLIP and a Rivet
type master link.
Addtional
RIVET or CLIP TYPE
master links available from RPE Motorcycle for .95 ea
Also available from RPE Motorcycle...   CHAIN TOOL IS AN
OPTIONAL ACCESSORY
(NOT included with chain and sprockets price)
Pro Chain Tool Kit @
.95
when purchased with a chain & sprockets kit!
Complete chain tool for most 520, 525 and 530 standard and o-ring chains
Break, press and rivet your chain with one compact tool
Will rivet hollow nose master links (will not rivet solid soft-nose pins)
Will push pin completely through link/side plate
Hardened body, riveting tip and breaker pin for strength and durability
Removable handle for compact storage
RPE Motorcycle
RPEcycle.
10725 Beverly Blvd, Whittier,  CA  90601
Hours: M-F 10-6, Sat 10-2 Pacific Std. Time
We accept
Visa, Master Charge, Discover, American Express
*FREE Shipping to USA only..
Hawaii, Guam, V.I., Puerto Rico, and Alaska included!!!
* INTERNATIONAL BUYERS
...
PLEASE LEAVE YOUR PHONE NUMBER FOR SHIPPING DOCUMENTS!!
DELIVERED
to
Australia
in 7 days!
DELIVERY
to
Canada
,
DELIVERY
to
Russian Federation , etc... etc....
Shipping time varies by country, and individual customs department situations...
JT Sprockets and JT Chain, the leading edge technology in production and materials with total dedication to excellence
gives you the ultimate motorcycle sprocket and chain range at unbeatable value. Our mission is to supply you the most
innovative and competitive product line fully backed by complete availability and service.
Your Absolute Satisfaction is
our Commitment with
JT Sprockets and JT Chain - World's No. 1 manufacturer of aftermarket motorcycle chain and sprockets,
constantly raising the industry's standards in performance, longevity and reliability.
Half the Power Loss
(Compared with Normal O-Ring)
X-Ring construction reduces friction by twisting between the side plates instead of being squashed.
Normal O-Rings and other makers’ modified O-Rings have squashed points that increase friction. The twisting action of the X-Ring disperses the pressure and minimizes power loss.
1.5 to 2 TImes Longer Wear Resistance
(Compared with Normal O-Ring)
The X-Ring’s four contact points greatly increase its sealing performance. This keeps the dirt out and the
lubrication in much better than any other
O-Ring.
X-Rings have the greatest wear resistance of any other type of O-Ring or Non-O-Ring chain
.
Why JT?
JT Sprockets is the world's leading manufacturer of aftermarket sprockets and chain, constantly raising the industry's standards for quality and service.
We are committed to supplying the most durable, best quality drive components available in the marketplace worldwide. This is why we produce and sell
more sprockets than all the other aftermarket brands combined.
Raw Materials
JT sprockets are made using only the best available materials. Aviation-grade 7075-T6 aluminium alloy for lightweight competition sprockets,
SCM415 chromoly steel alloy for front sprockets, and we are the only sprocket manufacturer using the ultra-durable high carbon C49 steel for rear sprockets.
Production
The JT Sprockets factory is the largest and most advanced in the world. It is fully equipped with high accuracy machinery, including the latest generation
of CNC computer design and computer controlled metal cutting equipment.
The essence of a high quality sprocket is in the high precision of manufacturing and the inherent quality of the material. Through accurate machining,
JT ensures maximum durability and performance.
JT Sprockets are manufactured the right way – by hobbing, machining and drilling. This is the only proven way to achieve the closest of tolerances
and the most accurate teeth profiles.
Heat treated and hand finished to perfection, all JT sprockets meet or exceed the highest possible quality standards set for the motorcycle industry.
Quality Control
Every sprocket goes through up to 25 production stages and 10 individual quality control checks before it is ready to leave the factory and
the production facility has achieved the highest European quality standards