-40%

WVO, WMO 55 GPH CENTRIFUGE w/BRASS and GAUGE

$ 108.23

Availability: 130 in stock
  • Item must be returned within: 14 Days
  • Return shipping will be paid by: Buyer
  • All returns accepted: Returns Accepted
  • Model: PAB-55BR
  • Brand: Pa Biodiesel Supply
  • Refund will be given as: Money Back
  • MPN: 55BR
  • Restocking Fee: 20%
  • Condition: New

    Description

    55 GPH CENTRIFUGE w/BRASS and GAUGE
    If you're thinking of driving on Waste Vegetable Oil, Waste Motor Oil, Transmission Fluid or any other alternative fuel , visit our Forum Library. We have gathered over 35+ forums in one place dealing with oil filtration and specific vehicles.
    See videos
    at Centrifuge for Dummies
    Oil centrifuges
    are used in the alternative fuels market for cleaning WVO, WMO, and other biofuels.
    To make biodiesel you need to process vegetable oil or you can filter your waste vegetable oil or waste motor oil to below .5 micron
    SPECIFICATIONS:
    Centrifuge comes with pressure gauge, 1/4" ball valve, 2 - 1/4" brass tees, 2 - 1/4" brass hose barbs, and 1/4" close nipple.
    The flow rate capacity of the wvo centrifuge is .93 GPM or 55 gallons per hour. The centrifuge measures 4" in diameter by 6.5" tall. Rotor is capable of holding 10.5 oz. of contaminants. One 55 gallon drum of WVO will take approximately 60 minutes to process. The viscosity is the critical part of this equation. Centrifuge generates at 85 PSI a centrifugal force 2,000 times greater than gravity at 7500 RPM. You need to purchase a 1/3HP motor with pump for centrifuge operation. The centrifuge will filter wvo, filter wmo, filter hydraulic oil, filter gear oil or dewater biodiesel. The centrifuge will remove magnesol with more than one pass necessary. At the end of the process, you can also remove glycerin, which requires no heating. More than one pass may be needed.You can build a wvo filtration system with this unit.
    All internal centrifuge parts certified nickel plated to prevent rust and corrosion.
    Every product is warranted to the original purchaser to be free from defects in material and workmanship for a period of five years.
    Bushings and shaft wear are not covered under this warranty
    Returns of only unopened, unused products, 20% re-stocking fee applies.  Shipping is not refundable.  Buyer pays return shipping.
    We are not responsible for international custom or VAT charges.
    For all your oil filtration
    needs visit us at
    Pa Biodiesel Supply